Welcome to Mana Precast
The structural dimensions of T-beams can be standardised, enabling series production and efficient industrialised manufacturing. This supports large-scale prefabrication, with the beams installed using cranes or launching gantries. Compared with conventional on-site construction, prefabricated methods reduce the need for formwork and scaffolding, lower labour requirements, shorten construction periods and accelerate bridge construction.

The side formwork is fabricated in sections using a steel frame designed as an integrated truss structure. The length of each section is determined by the beam design and typically corresponds to the spacing between transverse diaphragms (3–6 m).
The casting bed is installed on a suitably designed foundation, with additional reinforcement provided at both ends as required by the structural design. A steel plate with a minimum thickness of 6 mm is used as the bottom formwork on the casting bed. At the beam's designated lifting locations, removable sections of bottom formwork, each 500 mm long, are provided to facilitate beam release and lifting from the casting bed.
High Strength and Stability
The robust steel structure provides the strength and rigidity required to withstand casting and vibration loads, ensuring reliable formwork performance and long-term durability.
Precision Control
Accurate fabrication and positioning of the formwork help maintain dimensional accuracy, alignment and consistency in the finished T-beam elements.
Efficient Vibration System
The integrated vibration system promotes effective concrete compaction, helping to minimise air voids and surface defects and achieve consistent concrete quality.