Welcome to Mana Precast
| Parameter | Value |
|---|---|
| Mould Type | Septic tank mould |
| Steel Grade | Q355B |
| Designed Service Life | 2000 cycles |
| Casting Plate Thickness | 8 mm |
| Locking Type | Pins / Bolts |
| Dimensional Tolerance | ±1.0 mm / m |
| Flatness Tolerance | ±1.5 mm over 3 m |
Precast reinforced concrete septic tanks can be manufactured under controlled factory conditions and installed on site, helping to reduce on-site construction work.
They can be used in a range of ground conditions, subject to site investigation and structural design. Compared with certain conventional construction methods, the use of precast septic tanks can reduce excavation requirements and the need for extensive sloped excavation. The extent to which temporary excavation support can be reduced depends on ground conditions, excavation depth and the installation method.
The installation process can be straightforward and efficient. Under suitable site conditions, lifting and positioning the main tank structure can take approximately 3–4 hours. Factory production helps improve dimensional consistency and construction efficiency while reducing the amount of work required on site.
Our moulds are available in the following capacities:
6 m3, 10 m3, 12 m3, 16 m3, 20 m3, 25 m3, 30 m3, 40 m3 and 50 m3.
High Strength, Rigidity and Stability: Designed to maintain dimensional accuracy and structural stability during concrete casting and demoulding.
Ease of Assembly and Disassembly: Designed for convenient assembly, dismantling and maintenance, with reliable positioning of mould components.
Mass Production Capability: Designed for repeated use in factory-based production and suitable for the specified curing conditions.
High-Quality Surface Finish: Casting surfaces are designed to produce consistent concrete finishes in accordance with the specified surface quality requirements.
Robust and Reliable Design: Designed for long service life, with effective sealing arrangements to minimise grout leakage during concrete casting.
Mould Maintenance
Clean and inspect the moulds regularly during use to remove residual concrete and prevent build-up that could affect the surface finish and dimensional accuracy of the precast components.
Use of Release Agent
Before each concrete pour, apply a suitable mould release agent evenly to the casting surfaces to facilitate demoulding and help prevent surface damage.
Operating Procedures
Follow the specified procedures for concrete pouring and vibration to ensure proper concrete compaction and minimise air voids and surface defects.
Properly designed and manufactured precast concrete septic tank moulds provide a reliable solution for the factory-based production of precast septic tank components.